WHAT BENEFITS WILL REMAP ECU ZIN BE?
WHAT BENEFITS WILL REMAP ECU ZIN BE?
The most basic benefit is the special treatment of the first throttle, helping the car to run light, load, smooth and no longer lack of fuel.
-All manual and scooter models are affected, especially those that do not have MAP sensors such as AB, Lead, SH mode, Vario... and after a period of use, the components inside the ECU are reduced in life. , damage, causing more and more serious crashes
– There are cars that cannot run when the engine is still cold, have to start the garage to warm up the engine to run …
-Instead of the solution of having to replace the ECU, I, and the whole team in the TRONGZEN team, will use the REMAP - TUNING method, re-align the fuel of the ECU, to solve the gas situation, and help the car run smoothly. , pick
-When remap - tuning properly, will not cause fuel consumption, because:
-For zin cars, we only watch for fuel in the areas where the car is running low on gasoline - wrong fire, causing a situation of crashes, cars...
-For a vehicle that has been configured, of course, it must be watched to meet enough carburetor, otherwise it will lead to a lack of fuel, causing the engine to heat up and affect the engine.
-The level of fuel consumption of the car, depends on the pot set (cone), if the pot is degraded, then you have to turn the throttle more than usual, the engine runs a lot but the car does not run much, making noise, the car is sluggish and roaring
-For example: a good pot set, turn 30% on the scooter, the car runs 60km/h. When the pot is degraded, you turn the 30% on the scooter, the car can only go up to 40km / h, it is mandatory to turn up the 50% scooter, then the car will reach 60km / h. And the level of fuel consumption is here
– Whether the MAP versions run well or not, whether it causes fuel consumption or not, depends on the person remap-tuning. Not in the file loading software
-Currently, customers who want to remap ECU zin can contact us.
-As long as you leave your address, we will report back to you the closest addresses to where you live, so that you can visit those stores.
===Customer satisfaction is our pride
======REMAP ECU HONDA (SHINDENGEN+KEIHIN)====
Phone number: 0379191323 – 0904849502 ( Trong)
2 thoughts on “REMAP ECU ZIN SẼ ĐƯỢC LỢI ÍCH GÌ?”
hi
I need a tool for Honda ramp with ECM SHINDENGEN – Is your software able to communicate with FT232R cable?
My software is used with its dedicated cable but there is also a cable that uses the FT232RQ chip that can work on my software. but I am not 100% sure it will work properly.